• 802.11ax Wi-Fi 6 wireless access point/li>
• Wired and wireless gigabit access
• Gigabit LAN PoE Out
• Multiple Gigabit downlink ports
• Easy to deploy x86 standard panel
• Dual-mode fit&fat

What This Product Does

AIR-WAP605AX-R2 is a dual-band high-performance gigabit wireless access point device based on the 802.11ax standard launched by AirPro, it could offer maximum 2.97Gbps access rate, and supports standard panel for easy installation. AIR-WAP605AX-R2 works in the 2.4GHz and 5GHz frequency bands and supports advanced wireless technologies such as MU-MIMO, OFDMA, spatial multiplexing, and TWT. The first radio works in the 2.4GHz frequency band and can provide a maximum access rate of 575Mbps; the second radio works in the 5GHz frequency band and can provide a maximum access rate of up to 2400Mbps.

802.11ax Wi-Fi 6 wireless access point

AIR-WAP605AX-R2 supports the 802.11ax standard, operates in both 2.4 GHz and 5 GHz band, and provides an access bandwidth up to 3000 Mbps. This model is a high-end in-wall access point for hotel, education, government and business networks.

Wired and wireless gigabit access

AIR-WAP605AX-R2 integrated gigabit wired uplink port, can truly meet the bandwidth requirement of wireless clients and four-gigabit (1Port PoE Out) downlink Ethernet ports which support flexible VLAN configuration, the wired and wireless traffic can be logically separated.

Gigabit LAN PoE Out

AIR-WAP605AX-R2 can provide the 1 Gigabit PoE LAN port to power on external device like IP Phone (VOIP) etc.

Multiple Gigabit downlink ports

AIR-WAP605AX-R2 can provide 4 Gigabit downlink ports that allow the customer to connect the terminals, which do not support Wi-Fi, and provide more stable connections.

Easy to deploy x86 standard panel

AIR-WAP605AX-R2 panel supports 86 box standards, and can perfectly fit plug-in installed to any standard panel, With the use of the PoE cable, the whole installation will be low cost, no noise, short period (the time to install an AP is less than 3 minutes).

Dual-mode fit&fat

AIR-WAP605AX-R2 can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.